Abstract of INFO-MAC archived encoded Mac binary file 'comm/ara/scr-supra-fax-modem-ara1.hqx' Uploaded 05/27/1994 16953 bytes From: Matthew Johnson Subject: Supra multiple CCL's for ARA 1.0 Date: Fri, 27 May 1994 11:38:24 +0000 --========================_15623452==_ Content-Type: text/plain; charset="us-ascii" Dear Archivists, The following CCL scripts come from the Supra Technical Support BBS, and are for use with various Supra Modems, under ARA 1.0. They extend the ability to work in adverse conditions above that of the already on your archive. ------ Enclosed are the CCL's Supra offers for use with our SupraFaxModem and AppleTalk Remote Access 1.0. These CCL's will work with following modems*: * SupraFaxModem V.32bis * SupraFaxModem V.32 * SupraFaxModem 144LC * SupraFaxModem 144PB * For SupraFaxModem Plus use the CCL provided with ARA. For the SupraModem 2400 and SupraModem 2400 Plus use the Hayes 2400 CCL provided with ARA. Desription of the various CCL's: SupraFaxModem V.32bis This is the standard CCL to be used with all the SupraFaxModems listed above SFM V.32bis - S110=3 This CCL should be used by the initiator of a call when line quality is poor. It will have the modems connect at 4800 then upshift to the highest speed that the line quality will permit (maximum 14,400) SFM V.32bis - S110=0 This CCL can be used on the Client or Host end when line conditions are very poor.It will limit carrier speeds to 9600 and below. SFM V.32bis/9600 - S110=0 This CCL also allows carrier speeds up to 9600 but also sets the serial port speed at 9600. This should be used on those Macs where high speed serial communication is a problem SFM V.32bis/9600/NHW - S110=0